1. Connect the cable from the box to 24Vdc. (not connect the blue and brown wires).
2. Connect the cable from the Jigging Reel to the box (not connect the blue and brown wires).
3. Switch the circuit breaker on.
4. Set Jigging reel to squid program: Press (1x star), (1x plus), (5x star), (1x plus). Now you have to change two settings so that works for mackerel.
5. To set the POWER POWER to 50 you will have to press star puttom until the power factor blinks the press plus few times until you will rets 50. Page 24 in manual.
To set the RELEAX TIME to zero.
6. When you press main pad the sinker star to pull the line out.
7. If you press plus pad the Jigging reel will make false bottom and start to draw in the line.
8. The Jigging reel will stop at zero for one a second and then the sinker will pull the line out again to the false bottom.
9. To stop the Jigging reel press the main bad, (page 12).
10. To set/clear a false bottom is by pressing plus/minus pad when the reel is paying out.
